cr2-ix.artful.router.fr.clara.net
spawn telnet cr2-ix.artful.router.fr.clara.net
Trying 10.6.0.2...
Connected to cr2-ix.artful.router.fr.clara.net.
Escape character is '^]'.


Cisco Systems Console



_____________________________________________________________

_________ .__                                        __
\_   ___ \|  | _____ ____________       ____   _____/  |_
/    \  \/|  | \__  \\_  __ \__  \     /    \_/ __ \   __\
\     \___|  |__/ __ \|  | \// __ \_  |   |  \  ___/|  |
 \______  /____(____  /__|  (____  / /\___|  /\___  >__|
        \/          \/           \/  \/    \/     \/

                         [+]
         ____  _     ____             _
        / ___|| |_  |  _ \  ___ _ __ (_)___
        \___ \| __| | | | |/ _ \ '_ \| / __|
         ___) | |_  | |_| |  __/ | | | \__ \
        |____/ \__| |____/ \___|_| |_|_|___/
   ____ ____  ____      _____  __    ______        __
  / ___|  _ \|___ \    |_ _\ \/ /   / ___\ \      / /
 | |   | |_) | __) |____| | \  /____\___ \\ \ /\ / /
 | |___|  _ < / __/_____| | /  \_____|__) |\ V  V /
  \____|_| \_\_____|   |___/_/\_\   |____/  \_/\_/

                         [+]

          [+] WARNING: ACCESS RESTRICTED [+]

                         [+]

_____________________________________________________________
 

Username: rancid.nuala

Password: 
Welcome rancid.nuala, everything will be logged.

CR2-IX-SW> (enable) 
CR2-IX-SW> (enable) set length 0
Screen length for this session set to 0.
CR2-IX-SW> (enable)  set logging session disable
System logging messages will not be sent to the current login session.
CR2-IX-SW> (enable) sh run
This command shows non-default configurations only.
Use 'show config all' to show both default and non-default configurations.
.................
.................................
....................................
....................................
...................................
...................................

.................................
.................................

.............................

....................

begin
!
# ***** NON-DEFAULT CONFIGURATION *****
!
!
#time: Wed Mar 18 2009, 11:15:26 CEST
!
#version 8.4(2a)
!
set password $2$8TvI$Le3eaMttCk5KLrAepYW/a0
set enablepass $2$idpH$mnU5cGqAgBCvX59O7re8j1
set prompt CR2-IX-SW>
set logout 0
set config mode text nvram
set banner motd ^C

_____________________________________________________________

_________ .__                                        __
\_   ___ \|  | _____ ____________       ____   _____/  |_
/    \  \/|  | \__  \\_  __ \__  \     /    \_/ __ \   __\
\     \___|  |__/ __ \|  | \// __ \_  |   |  \  ___/|  |
 \______  /____(____  /__|  (____  / /\___|  /\___  >__|
        \/          \/           \/  \/    \/     \/

                         [+]
         ____  _     ____             _
        / ___|| |_  |  _ \  ___ _ __ (_)___
        \___ \| __| | | | |/ _ \ '_ \| / __|
         ___) | |_  | |_| |  __/ | | | \__ \
        |____/ \__| |____/ \___|_| |_|_|___/
   ____ ____  ____      _____  __    ______        __
  / ___|  _ \|___ \    |_ _\ \/ /   / ___\ \      / /
 | |   | |_) | __) |____| | \  /____\___ \\ \ /\ / /
 | |___|  _ < / __/_____| | /  \_____|__) |\ V  V /
  \____|_| \_\_____|   |___/_/\_\   |____/  \_/\_/

                         [+]

          [+] WARNING: ACCESS RESTRICTED [+]

                         [+]

_____________________________________________________________^C

!
#errordetection
set errordetection inband disable
set errordetection memory disable
set errordetection portcounter disable
!
#system
set system name  CR2-IX-SW
set system location IXeurope-Stdenis
set system contact  noc@artful.net
set traffic monitor 80
set system core-file  slot0:crashinfo
!
#Default Inlinepower
set inlinepower defaultallocation 7000
!
#!
#default portcost mode
set spantree defaultcostmode long
!
#snmp
set snmp community read-only      Ais35Noc
set snmp community read-write     
set snmp community read-write-all 
set snmp trap enable  module
set snmp trap enable  chassis
set snmp trap enable  bridge
set snmp trap enable  vtp
set snmp trap enable  vlancreate
set snmp trap enable  vlandelete
set snmp trap enable  auth
set snmp trap enable  entityfru
set snmp trap enable  ippermit
set snmp trap enable  sysinfolog
set snmp community-ext chu3Boote read-only 
set snmp trap enable  vmps
set snmp trap enable  entity
set snmp trap enable  config
set snmp trap enable stpx inconsistency
set snmp trap enable stpx loopinconsistency
set snmp trap enable stpx rootinconsistency
set snmp trap enable  syslog
set snmp trap enable  system
set snmp trap enable  envfan
set snmp trap enable  envshutdown
set snmp trap enable  envpower
set snmp trap enable  envtemp
set snmp trap enable  envstate
set snmp trap enable  flashinsert
set snmp trap enable  flashremove
set snmp trap enable  callhomesmtp
set snmp trap enable  macnotification
set snmp trap enable  macthreshold
set snmp trap enable  macmove
set snmp trap enable linkerrlow
set snmp trap enable linkerrhigh
set snmp trap enable  l2tunnel
set snmp trap enable redundancy
!
#radius
set radius server 10.6.0.15 auth-port 1812 primary
set radius server 10.2.31.20 auth-port 1812 
set radius key blabolo
!
#authentication
set authentication login radius enable telnet primary
set authentication enable radius enable telnet primary
!
#stp mode
set spantree mode mst
!
#vtp
set vtp domain artful
set vtp mode transparent vlan
set vtp passwd tordaget
set vlan 2 name backup type ethernet mtu 1500 said 100002 state active 
set vlan 3 name acces type ethernet mtu 1500 said 100003 state active 
set vlan 4 name FWBack type ethernet mtu 1500 said 100004 state active 
set vlan 5 name FWFront type ethernet mtu 1500 said 100005 state active 
set vlan 8 name Veo_10.9.1.0 type ethernet mtu 1500 said 100008 state active 
set vlan 9 name Veo_10.9.13.0 type ethernet mtu 1500 said 100009 state active 
set vlan 10 name Veo_10.9.12.0 type ethernet mtu 1500 said 100010 state active 
set vlan 11 name Veo_10.9.5.0 type ethernet mtu 1500 said 100011 state active 
set vlan 12 name Veo_10.9.4.0 type ethernet mtu 1500 said 100012 state active 
set vlan 13 name Veo_10.9.9.0 type ethernet mtu 1500 said 100013 state active 
set vlan 14 name Veo_10.9.8.0 type ethernet mtu 1500 said 100014 state active 
set vlan 15 name Veo_10.9.11.0 type ethernet mtu 1500 said 100015 state active 
set vlan 16 name Veo_10.9.10.0 type ethernet mtu 1500 said 100016 state active 
set vlan 17 name Veo_10.9.14.0 type ethernet mtu 1500 said 100017 state active 
set vlan 18 name Veo_10.9.0.0 type ethernet mtu 1500 said 100018 state active 
set vlan 19 name Veolia-10.9 type ethernet mtu 1500 said 100019 state active 
set vlan 20 name Veolia-adm type ethernet mtu 1500 said 100020 state active 
set vlan 21 name Veolia-front type ethernet mtu 1500 said 100021 state active 
set vlan 22 name ecompil-adm type ethernet mtu 1500 said 100022 state active 
set vlan 23 name ecompil type ethernet mtu 1500 said 100023 state active 
set vlan 24 name test-lb type ethernet mtu 1500 said 100024 state active 
set vlan 25 name sephira-telec type ethernet mtu 1500 said 100025 state active 
set vlan 26 name mut-housing type ethernet mtu 1500 said 100026 state active 
set vlan 27 name regionjobs-adm type ethernet mtu 1500 said 100027 state active 
set vlan 29 name vegedis type ethernet mtu 1500 said 100029 state active 
set vlan 30 name Faurecia-adm type ethernet mtu 1500 said 100030 state active 
set vlan 31 name Faurecia-pub type ethernet mtu 1500 said 100031 state active 
set vlan 32 name Vivendi-Priv type ethernet mtu 1500 said 100032 state active 
set vlan 33 name RMCinfo type ethernet mtu 1500 said 100033 state active 
set vlan 35 name AFM type ethernet mtu 1500 said 100035 state active 
set vlan 36 name clarins type ethernet mtu 1500 said 100036 state active 
set vlan 37 name 24H00 type ethernet mtu 1500 said 100037 state active 
set vlan 38 name hermes type ethernet mtu 1500 said 100038 state active 
set vlan 39 name xinek type ethernet mtu 1500 said 100039 state active 
set vlan 40 name microsoft type ethernet mtu 1500 said 100040 state active 
set vlan 41 name BDV type ethernet mtu 1500 said 100041 state active 
set vlan 42 name edenpark2 type ethernet mtu 1500 said 100042 state active 
set vlan 58 name Veolia-Mgt-FW type ethernet mtu 1500 said 100058 state active 
set vlan 59 name Veo_10.9.6.0 type ethernet mtu 1500 said 100059 state active 
set vlan 60 name IX-Access-LB-GDF-SUEZ type ethernet mtu 1500 said 100060 state active 
set vlan 61 name Veo_10.9.7.0 type ethernet mtu 1500 said 100061 state active 
set vlan 62 name veolia-management type ethernet mtu 1500 said 100062 state active 
set vlan 63 name veolia-synchro-fw type ethernet mtu 1500 said 100063 state active 
set vlan 100 name IX-Admin type ethernet mtu 1500 said 100100 state active 
set vlan 101 name IX-Admin-client type ethernet mtu 1500 said 100101 state active 
set vlan 103 name IX-Access type ethernet mtu 1500 said 100103 state active 
set vlan 104 name IX-FW-back type ethernet mtu 1500 said 100104 state active 
set vlan 105 name FW-front type ethernet mtu 1500 said 100105 state active 
set vlan 106 name FW-Front-Client type ethernet mtu 1500 said 100106 state active 
set vlan 110 name Precom-isseo type ethernet mtu 1500 said 100110 state active 
set vlan 111 name RegionsCentre type ethernet mtu 1500 said 100111 state active 
set vlan 112 name HFP type ethernet mtu 1500 said 100112 state active 
set vlan 113 name Travelsoft type ethernet mtu 1500 said 100113 state active 
set vlan 114 name voxmobili type ethernet mtu 1500 said 100114 state active 
set vlan 115 name netpartage type ethernet mtu 1500 said 100115 state active 
set vlan 116 name voyageur_du_monde type ethernet mtu 1500 said 100116 state active 
set vlan 117 name wister type ethernet mtu 1500 said 100117 state active 
set vlan 118 name voxmobili_dmz type ethernet mtu 1500 said 100118 state active 
set vlan 119 name optile type ethernet mtu 1500 said 100119 state active 
set vlan 120 name 12bis type ethernet mtu 1500 said 100120 state active 
set vlan 121 name bollore type ethernet mtu 1500 said 100121 state active 
set vlan 122 name edenpark type ethernet mtu 1500 said 100122 state active 
set vlan 123 name bazarchic type ethernet mtu 1500 said 100123 state active 
set vlan 124 name syfadis type ethernet mtu 1500 said 100124 state active 
set vlan 125 name voxmobili_vpn1 type ethernet mtu 1500 said 100125 state active 
set vlan 126 name mubito type ethernet mtu 1500 said 100126 state active 
set vlan 127 name easyvoyage type ethernet mtu 1500 said 100127 state active 
set vlan 128 name ecdg type ethernet mtu 1500 said 100128 state active 
set vlan 129 name netquarks type ethernet mtu 1500 said 100129 state active 
set vlan 130 name S2b type ethernet mtu 1500 said 100130 state active 
set vlan 131 name Syfadis type ethernet mtu 1500 said 100131 state active 
set vlan 132 name Wonderbra type ethernet mtu 1500 said 100132 state active 
set vlan 133 name Dim type ethernet mtu 1500 said 100133 state active 
set vlan 134 name Universal type ethernet mtu 1500 said 100134 state active 
set vlan 135 name wehaveadream type ethernet mtu 1500 said 100135 state active 
set vlan 136 name Vivendi type ethernet mtu 1500 said 100136 state active 
set vlan 137 name Brainsonic type ethernet mtu 1500 said 100137 state active 
set vlan 138 name mon_usine type ethernet mtu 1500 said 100138 state active 
set vlan 139 name Xen-mutualise type ethernet mtu 1500 said 100139 state active 
set vlan 140 name Siriona type ethernet mtu 1500 said 100140 state active 
set vlan 141 name Itelios type ethernet mtu 1500 said 100141 state active 
set vlan 142 name Adele type ethernet mtu 1500 said 100142 state active 
set vlan 143 name Store_factory type ethernet mtu 1500 said 100143 state active 
set vlan 144 name GDFSUEZ type ethernet mtu 1500 said 100144 state active 
set vlan 150 name FW-HA type ethernet mtu 1500 said 100150 state active 
set vlan 151 name Transit-Clara1 type ethernet mtu 1500 said 100151 state active 
set vlan 152 name AGF type ethernet mtu 1500 said 100152 state active 
set vlan 153 name Voiles-Voiliers type ethernet mtu 1500 said 100153 state active 
set vlan 154 name voxmobili_vpn_192.168.223 type ethernet mtu 1500 said 100154 state active 
set vlan 155 name Loccitane type ethernet mtu 1500 said 100155 state active 
set vlan 156 name Infinancials type ethernet mtu 1500 said 100156 state active 
set vlan 157 name Telemaison type ethernet mtu 1500 said 100157 state active 
set vlan 158 name Decathlon type ethernet mtu 1500 said 100158 state active 
set vlan 501 name IX2-admin-client type ethernet mtu 1500 said 100501 state active 
set vlan 503 name IX-FWX-Access type ethernet mtu 1500 said 100503 state active 
set vlan 504 name IX-FWX-Back type ethernet mtu 1500 said 100504 state active 
set vlan 505 name IX-FWX-Front type ethernet mtu 1500 said 100505 state active 
set vlan 506 name IX-FWX-Front-Client type ethernet mtu 1500 said 100506 state active 
set vlan 507 name IX-FWX-HA type ethernet mtu 1500 said 100507 state active 
set vlan 997 name apocope-decathlon-vpn type ethernet mtu 1500 said 100997 state active 
set vlan 999 name opendisc type ethernet mtu 1500 said 100999 state active 
set vlan 1002 name fddi-default type fddi mtu 1500 said 101002 state active 
set vlan 1004 name fddinet-default type fddinet mtu 1500 said 101004 state active stp ieee 
set vlan 1005 name trnet-default type trbrf mtu 1500 said 101005 state active stp ibm 
set vlan 1,50
set vlan 1003 name token-ring-default type trcrf mtu 1500 said 101003 state active mode srb aremaxhop 7 stemaxhop 7 backupcrf off 
!
#ip
set interface sc0 100 10.6.0.2/255.255.252.0 10.6.3.255

set interface sc1 1 10.2.0.11/255.255.224.0 10.2.31.255

set ip route 0.0.0.0/0.0.0.0         10.6.0.254     
!
#spantree

#MST (IEEE 802.1s)
set spantree priority 8192  mst 0-15

#MST Configuration
set spantree mst config rollback force
set spantree mst config name Artful-SD revision 1
set spantree mst config commit 

!
#syslog
set logging console disable
set logging telnet disable
set logging server enable
set logging server 10.7.0.126
set logging server 10.2.0.199
set logging level cdp 6 default
set logging level mcast 6 default
set logging level dtp 6 default
set logging level dvlan 6 default
set logging level earl 6 default
set logging level ip 6 default
set logging level pruning 6 default
set logging level snmp 6 default
set logging level spantree 6 default
set logging level sys 6 default
set logging level tac 6 default
set logging level tcp 6 default
set logging level telnet 6 default
set logging level tftp 6 default
set logging level vtp 6 default
set logging level vmps 6 default
set logging level kernel 6 default
set logging level filesys 6 default
set logging level mgmt 6 default
set logging level mls 6 default
set logging level protfilt 6 default
set logging level security 6 default
set logging level radius 6 default
set logging level udld 6 default
set logging level gvrp 6 default
set logging level cops 6 default
set logging level qos 6 default
set logging level acl 6 default
set logging level rsvp 6 default
set logging level ld 6 default
set logging level privatevlan 6 default
set logging level ethc 6 default
set logging level gl2pt 6 default
set logging level callhome 6 default
set logging level dhcp-snooping 6 default
set logging level diag 6 default
set logging server facility LOCAL1
set logging server severity 7
set logging timestamp disable
!
#ntp
set ntp client enable
set ntp server 10.2.3.10
set timezone CEST 1 0
set summertime enable 
!
#set boot command
set boot config-register 0x2102
set boot system flash bootflash:cat6000-sup2k8.8-4-2a.bin
!
#permit list
set ip permit enable telnet
set ip permit enable ssh
set ip permit enable snmp
set ip permit 10.0.1.0 255.255.255.0
set ip permit 10.0.10.0 255.255.254.0
set ip permit 10.1.31.0 255.255.255.0
set ip permit 10.2.0.0 255.255.255.0
set ip permit 10.2.0.252 
set ip permit 10.2.3.5 
set ip permit 10.2.3.7 
set ip permit 10.2.3.10 
set ip permit 10.2.5.30 
set ip permit 10.2.9.5 
set ip permit 10.2.31.5 
set ip permit 10.2.31.250 
set ip permit 10.6.0.0 255.255.252.0
set ip permit 10.7.0.96 255.255.255.252
set ip permit 10.7.0.126 
!
#mls
set mls nde version 5
set mls agingtime long-duration 1920
set mls agingtime 256
set mls agingtime ipx 256
!
#qos
set qos wrr 2q2t 5 255 
set qos wrr 1p2q2t 5 255 
set qos wrr 1p2q1t 5 255 
!
#udld
set udld enable
!
#channelprotocol
set channelprotocol lacp 7
set channelprotocol lacp 8
!
#port channel
set port lacp-channel 7/3-4 119
set port lacp-channel 7/7-8 120
set port lacp-channel 8/7-8 121
set port channel 5/1-4 149
!
# default port status is enable
!
!
#module 1 : 2-port 1000BaseX Supervisor
set vlan 152  1/2
set port trap       1/1-2  enable
set port name       1/1  TO CR1(MUX1610)
clear trunk 1/1  150,501,503-507,1000-4094
set trunk 1/1  on dot1q 1-149,151-500,502,508-999
clear trunk 1/2  1006-1023
set trunk 1/2  off negotiate 1-1005,1024-4094
set spantree portcost    1/1  400000 mst
set port description 1/1  To Ldcom MUX 1610
set port description 1/2  "Transit-Clara2"
!
#module 2 : 48-port 10/100/1000BaseT Ethernet
set vlan 3    2/1
set vlan 4    2/2
set vlan 100  2/35-36
set port disable    2/4-48

set port speed      2/10-13,2/27-30,2/35-36,2/41-43 1000
set port name       2/1  Big-LD-1.1
set port name       2/2  Big-LD-1.2
set port name       2/3  BigLD-Mgmt
set port name       2/10 sw01blix11.PORTSECOU
set port name       2/11 sw02blix11.PORTSECOU
set port name       2/12 sw01blix12.PORTSECOU
set port name       2/13 sw02blix12.PORTSECOU
clear trunk 2/1  1-2,4-31,33-37,39-4094
set trunk 2/1  on dot1q 3,32,38
clear trunk 2/10 2,5-34,36-37,39-40,42-99,102,104-4094
set trunk 2/10 on dot1q 1,3-4,35,38,41,100-101,103
clear trunk 2/11 2,5-34,36-37,39-99,102,104-113,115-4094
set trunk 2/11 on dot1q 1,3-4,35,38,100-101,103,114
clear trunk 2/12 5-35,39-99,102-103,105-121,123-4094
set trunk 2/12 on dot1q 1-4,36-38,100-101,104,122
clear trunk 2/13 5-37,39-99,102,105,107-4094
set trunk 2/13 on dot1q 1-4,38,100-101,103-104,106
clear trunk 2/27 5-35,39-99,102,105,107-117,119-121,123-124,128-142,144-998,1000-4094
set trunk 2/27 on dot1q 1-4,36-38,100-101,103-104,106,118,122,125-127,143,999
clear trunk 2/28 2,5-34,36-99,102,105,107-125,127-4094
set trunk 2/28 on dot1q 1,3-4,35,100-101,103-104,106,126
clear trunk 2/29 2-37,39-99,102,105-125,127-133,135-4094
set trunk 2/29 on dot1q 1,38,100-101,103-104,126,134
clear trunk 2/30 2-99,102,105-125,127-133,135-4094
set trunk 2/30 on dot1q 1,100-101,103-104,126,134
clear trunk 2/35 2,5-25,27-99,101-102,105-4094
set trunk 2/35 on dot1q 1,3-4,26,100,103-104
clear trunk 2/36 2-99,102-112,114-128,130-136,138-4094
set trunk 2/36 on dot1q 1,100-101,113,129,137
clear trunk 2/46 2-100,102-4094
set trunk 2/46 on dot1q 1,101
set port description 2/1  Big-LD-1.1
set port description 2/2  Big-LD-1.2
set port description 2/3  "F5 Mgmt"
set port description 2/10 sw01blix11.PORT-SECOURS
set port description 2/11 sw02blix11.PORT-SECOURS
set port description 2/12 sw01blix12.PORT-SECOURS
set port description 2/13 sw02blix12.PORT-SECOURS
set port description 2/27 sw01blix15.PORT-SECOURS
set port description 2/28 sw02blix15.PORT-SECOURS
set port description 2/29 sw02blix16.PORT-SECOURS
set port description 2/30 sw01blix16.PORT-SECOURS
set port description 2/35 sw01ixc4.PORT-SECOURS
set port description 2/36 sw02ixc4.PORT-SECOURS
!
#module 3 : 48-port 10/100/1000BaseT Ethernet
set vlan 12   3/40
set vlan 100  3/2,3/6,3/9,3/12,3/32,3/38
set vlan 101  3/3,3/39,3/43-44,3/46
set vlan 103  3/4
set vlan 104  3/5,3/41-42,3/47
set vlan 105  3/48
set vlan 110  3/20
set vlan 150  3/45
set vlan 501  3/34
set vlan 504  3/35
set vlan 505  3/36
set vlan 507  3/33
set port disable    3/1,3/7-8,3/13-19,3/21-31,3/37

set port speed      3/6,3/44  100
set port speed      3/1,3/3,3/9-12,3/45-48 1000
set port duplex     3/6,3/44  full
set port trap       3/1-48  enable
set port name       3/32 FW1-IX2_MGT
set port name       3/33 FW1-IX2_HA
set port name       3/34 FW1-IX2_trust
set port name       3/35 FW1-IX2_DMZ
set port name       3/36 FW1-IX2_untrust
set trunk 3/1  on dot1q 1-4094
clear trunk 3/5  1-103,105-503,505-4094
set trunk 3/5  on dot1q 104,504
set trunk 3/7  on dot1q 1-4094
set trunk 3/8  on dot1q 1-4094
clear trunk 3/9  2-3,5-99,102,105-112,114-4094
set trunk 3/9  on dot1q 1,4,100-101,103-104,113
clear trunk 3/10 2-3,5-99,102,105-4094
set trunk 3/10 on dot1q 1,4,100-101,103-104
clear trunk 3/11 2-3,5-36,39-99,102,105-4094
set trunk 3/11 on dot1q 1,4,37-38,100-101,103-104
clear trunk 3/12 2-99,105,111-4094
set trunk 3/12 on dot1q 1,100-104,106-110
clear trunk 3/34 1-100,102-500,502-4094
set trunk 3/34 on dot1q 101,501
clear trunk 3/35 1-103,105-503,505-4094
set trunk 3/35 on dot1q 104,504
clear trunk 3/39 105,150,501,503-507
set trunk 3/39 on dot1q 1-104,106-149,151-500,502,508-4094
clear trunk 3/40 1-11,13,15-4094
set trunk 3/40 on dot1q 12,14
clear trunk 3/43 105,150-154,157-4094
set trunk 3/43 on dot1q 1-104,106-149,155-156
clear trunk 3/44 105,150-154,157-4094
set trunk 3/44 on dot1q 1-104,106-149,155-156
clear trunk 3/46 2-24,26-31,33,37,39-99,102-109,118,125,145-151,159-996,998-4094
set trunk 3/46 on dot1q 1,25,32,34-36,38,100-101,110-117,119-124,126-144,152-158,997
clear trunk 3/47 1-3,5-25,27-103,105-4094
set trunk 3/47 on dot1q 4,26,104
set spantree mst link-type 3/41-42 point-to-point
set port errordetection 3/48 inerrors enable
set port errordetection 3/48 rxcrc enable
set port errordetection 3/48 txcrc enable
set port description 3/2  big2-ix-mgt
set port description 3/3  big2-ix-1.1
set port description 3/4  big2-ix-1.2
set port description 3/5  big2-ix-1.3
set port description 3/6  cs01ixg2
set port description 3/9  sw01ixG6
set port description 3/10 sw01blix01
set port description 3/11 sw01blix02
set port description 3/12 sw01ixe1
set port description 3/20 PRECOM-ADSL
set port description 3/32 FW1-IX2_MGT
set port description 3/33 FW1-IX2_HA
set port description 3/34 FW1-IX2_trust
set port description 3/35 FW1-IX2_DMZ
set port description 3/36 FW1-IX2_untrust
set port description 3/38 FW2-IX1_MGT
set port description 3/39 big2-ix-1.6
set port description 3/40 Big2-IX-1.4
set port description 3/41 Avalanche105
set port description 3/42 Avalanche5
set port description 3/43 Datamover2-cge1
set port description 3/44 Datamover3-cge1
set port description 3/45 FW2-IX1_HA
set port description 3/46 FW2-IX1_Trust
set port description 3/47 FW2-IX1_DMZ
set port description 3/48 FW2-IX1_Untrust
!
#module 4 : 48-port 10/100/1000BaseT Ethernet
set vlan 100  4/1-4,4/14-15
set port disable    4/1-4,4/9-15

set port speed      4/1-4 1000
set port name       4/1  sw01ixd4.PORT-SECOUR
set port name       4/2  sw02ixd4.PORT-SECOUR
set port name       4/3  sw01ixd5.PORTSECOU
set port name       4/4  sw02ixd5.PORTSECOU
set port name       4/9  easy-fw-02_0-0
set port name       4/10 easy-fw-02_0-1
set port name       4/11 easy-fw-02_0-2
set port name       4/12 easy-fw-02_0-3
set port name       4/13 easy-fw-02_aux
set port name       4/14 sw01ixd7.PORT-SECOUR
set port name       4/15 sw02ixd7.PORT-SECOUR
clear trunk 4/1  2-3,5-99,102-4094
set trunk 4/1  on dot1q 1,4,100-101
clear trunk 4/2  2-7,9-18,20-99,102-130,132-4094
set trunk 4/2  on dot1q 1,8,19,100-101,131
clear trunk 4/3  2-3,5-99,102-4094
set trunk 4/3  on dot1q 1,4,100-101
clear trunk 4/4  2-99,102-130,132-4094
set trunk 4/4  on dot1q 1,100-101,131
set port description 4/1  sw01ixd4.PORT-SECOURS
set port description 4/2  sw02ixd4.PORT-SECOURS
set port description 4/3  sw01ixd5.PORT-SECOURS
set port description 4/4  sw02ixd5.PORT-SECOURS
set port description 4/9  easy-fw-02_0-0
set port description 4/10 easy-fw-02_0-1
set port description 4/11 easy-fw-02_0-2
set port description 4/12 easy-fw-02_0-3
set port description 4/13 easy-fw-02_aux
set port description 4/14 sw01ixd7.PORT-SECOUR
set port description 4/15 sw02ixd7.PORT-SECOUR
!
#module 5 : 48-port 10/100/1000BaseT Ethernet
set vlan 100  5/41-43
set port disable    5/41-43

clear trunk 5/41 1-99,102-4094
set trunk 5/41 on dot1q 100-101
clear trunk 5/42 1-37,39-99,102-4094
set trunk 5/42 on dot1q 38,100-101
clear trunk 5/43 2-34,36-99,102-111,113-116,118-133,135-4094
set trunk 5/43 on dot1q 1,35,100-101,112,117,134
set port description 5/41 sw01ixd2.PORT-SECOURS
set port description 5/42 sw02ixd2.PORT-SECOURS
set port description 5/43 sw03ixd2.PORT-SECOURS
!
#module 6 empty
!
#module 7 : 8-port 1000BaseX Ethernet
set vlan 152  7/3-4
set port disable    7/1-2,7/5-8

set port negotiation 7/7-8 disable
set port flowcontrol    7/1 send off
set udld disable 7/2-3 
set trunk 7/1  on dot1q 1-4094
set trunk 7/3  off negotiate 1-4094
set trunk 7/4  off negotiate 1-4094
set trunk 7/7  on dot1q 1-4094
set trunk 7/8  on dot1q 1-4094
set spantree portfast    7/3-4 enable
set port description 7/1  CR1-IX
set port description 7/3  SD-AR2 gi1/1
set port description 7/4  SD-AR2 gi1/2
!
#module 8 : 8-port 1000BaseX Ethernet
set port disable    8/1-6

set port negotiation 8/7-8 disable
set trunk 8/7  on dot1q 1-4094
set trunk 8/8  on dot1q 1-4094
set port description 8/7  CR1-IX LACP1
set port description 8/8  CR1-IX LACP2
!
#module 9 empty
!
#module 15 : 1-port Multilayer Switch Feature Card
set vlan 152  15/1
!
#module 16 empty
!
#switch port analyzer
set span permit-list disable
set span permit-list  include
end
CR2-IX-SW> (enable)exit
Connection closed by foreign host.