Config reseau

Centos

• Config interface réseau de base

DEVICE=ethX
ONBOOT=yes
BOOTPROTO=static
HWADDR=00:E0:81:34:BE:BB (permet de forcer la carte avec la mac xxx d'être ethX)
IPADDR=10.252.43.131
BROADCAST=10.252.43.255
NETWORK=10.252.43.128
NETMASK=255.255.255.128
PEERDNS=no
ETHTOOL_OPTS="autoneg off speed 100 duplex full"
MTU=9000

# /etc/sysconfig/network : Supprime la route en 169.254.0.0 (APIPA) 
NOZEROCONF=yes

• Config Ipv6

IPV6INIT=yes
IPV6ADDR=2001:14c8:0700:0003:0000:0000:0001:0001

et dans /etc/sysconfig/network :
NETWORKING_IPV6=YES
IPV6_DEFAULTGW=2001:14c8:0700:0003:ffff:ffff:ffff:fffe

• Config bonding

Voir https://wiki.blaxeen.com/index.php/Bonding_%26_trunking

• Config vlan

DEVICE=eth0.250
VLAN=yes

• Config route

 
Fichier route-ethX
10.0.0.0/8 via 10.252.44.126
172.16.0.0/12 via 10.252.44.126
192.168.0.0/16 via 10.252.44.126

Debian

• Config interface réseau de base

auto lo
iface lo inet loopback

# The primary network interface
auto eth1
allow-hotplug eth1
iface eth1 inet static
        address 217.174.206.178
        netmask 255.255.255.224
        network 217.174.206.160
        broadcast 217.174.206.191
        gateway 217.174.206.190
        # dns-* options are implemented by the resolvconf package, if installed
        dns-nameservers 217.174.199.225 92.43.252.215
        pre-up ethtool -s eth1 speed 100 duplex full autoneg off
        mtu 9000